Tempish Viber 110 1000004611 rollers

TEMPISH Viber 110 rollers

Properties:

• TEMPISH VIBER 110 skates combine a hard freestyle boot with the speed of large knots
• A special universal model designed for Zar
• This skate is suitable for advanced and experienced skaters.
• Hard frame skates are intended for universal use due to their design and equipment.
• Thanks to kr
• The roller is equipped with combinations of three wheels
• There is
• The skeleton of the skate is well ventilated - ventilation reaches the foot thanks to a ventilated insert, which is
• The roller joint uses a screw with a special nut and washer, thanks to the angle
• G.
• The strap is attached to the frame so that it does not get caught on the second roller during slalom and freestyle, the buckle itself is protected against damage by the bottom plastic tab.
• The padding strap is equipped with a single-step micro buckle with very comfortable tightening and loosening thanks to a ratchet system.
• The plastic pads on the outside of the skates are removable, as is the padding strap.
• Shoelace holes are equipped with strong metal rings, which are
• Thanks to the use of waxed shoelaces with a width of 10 mm, it is possible to tighten the cord gradually
• The roller liner is ventilated, has holes all around and is reinforced with PVC in g
• In the vicinity of the toes
• At the back there is a loop with a reflective strip.
• Reflective details are located on
• In the vicinity of the Achilles tendon, the liner is lowered and V-shaped, which increases maneuverability and mobility, making it easier to perform tricks
• Shipping
• At the bottom of the lift
• The shoe has an anatomical insert with a thickness of 3 mm,
• Under the insert in the heel part, a shock-absorbing silent block made of TPR material, with an angle of
• The tongue of the insole is sufficiently stiff and thick, it consists of 2 parts, thanks to which it perfectly reproduces the arch of the foot.
• The tongue holds positions well thanks to the use of a string.
• The skids made in CNC technology are strongly reinforced with a tr
• Attached to the shoe with 2 central bolts and 2 solid aluminum cleats
• Thanks to these blocks, power transmission is much more efficient.
• The undercarriage can be adjusted transversely and longitudinally.
• Hollow axles for weight reduction have a diameter of 8mm and are mounted on the left roller on the inside and on the right roller on the outside to prevent the bolts from loosening while driving.

Technical parameters

• Recommended use: Sporty and aggressive skating, advanced and experienced riders.
• Category: Urban
• Skeleton:
• Inner material: thin nylon, absorbent microfiber
• Frames: CNC construction, additionally reinforced, simultaneous, transversely and longitudinally adjustable
• Mounting dimensions pl
• Size k
• Bearings:
• Brake: Yes
• Fastening system: Special cord
• Weight limit:
• Length of the inner insert in cm Size 37 38 39 40 41 42 43 44 45 46 47 cm 23.6 24.5 25.2 25.9 26.6 27.6 28.3 29 - -
• Roll alignment: The roller must be on "contact". The finger should touch the end of the roll, but it must not be curled. Why ? But / rolka / Liner will diverge to Mr.